无溶剂法大量制备高效红光碳点及其在白光器件中的应用

以邻苯二胺、 2,5-二氨基苯磺酸和三氯化铝为原料, 通过无溶剂法大量制备了高效的红色荧光碳点 (R-CDs). 制得的碳点尺寸大约为2.4 nm, 含有13%的氮元素, 主要由高度石墨化的碳核及覆盖在其表面的大量官能团构成. 在不同的波长光激发下, 碳点在乙醇溶液中表现出不依赖于激发的红光发射, 其荧光峰位于 704 nm, 最大量子产率达到22%. 由于R-CDs具有优异的光学性质, 利用其构筑了紫外光激发的碳基白色发光二极管, 其色坐标为(0.33, 0.33), 非常接近自然光. 该研究为高效红色荧光碳点的大量制备提供了一种新路径, 同时拓宽了其在白光器件中的应用.     

9,10⁃二(N⁃苯基吲哚⁃3⁃乙烯基)蒽的合成及聚集诱导荧光和压致荧光变色性质

通过简单的Wittig反应合成了一个荧光化合物9,10-二(N-苯基吲哚-3-乙烯基)蒽(IA-Ph); 通过核磁共振和质谱对其结构进行了确认; 利用荧光发射光谱和紫外吸收光谱对其光物理性质进行了表征. 结果表明, 化合物IA-Ph兼具聚集诱导荧光(AIE)和压致荧光变色性质, 在相同浓度下, 该化合物在THF/H₂O(体积比1∶9)混合溶液中的荧光强度比在纯四氢呋喃(THF)溶液中增加了12倍, 具有明显的AIE效应. 通过简单而有效的机械力研磨, 化合物可以从初始的发绿光转变为研磨后的橙红光, 光谱红移约68 nm; 而且在加热或溶剂熏蒸条件下, 化合物的颜色可以回复到起始的绿光, 具有完全可逆性.     

Liquid Metal Superelastic Fiber Mat Enabling Highly Permeable Wearable Electronics Toward Comfortable e-Skins

Low water vapor and air permeability is a persistent challenge in wearable and on-skin electronics, as it reduces wearing comfort, and leads to skin irritation and inflammation in the long term. To tackle this issue, Zheng and coworkers designed a stretchable conductor based on an elastomeric fiber mat coated by liquid metal. After simple activation via stretching, the flexible conductor was endowed with excellent permeability, good stretchability, exceptional electrical stability, and good biocompatibility, ascribed to the mesh-like structure and the vertically buckled structure of the liquid metal. Based on the intriguing properties of the material, it was employed in a multi-functional wearable device, able to detect the heartbeat and sweat while serving as a heating device. The corresponding research has been published in Nature Materials and can be accessed at https://doi.org/10.1038/s41563-020-00902-3.     

基于QuEChERS净化/气相色谱法测定蔬菜及水果中16种有机氯农药残留

该文建立了蔬菜及水果中16种有机氯农药残留的QuEChERS净化/气相色谱快速检测方法。样品经1%冰乙酸乙腈处理,QuEChERS净化,气相色谱分离后,以色谱峰保留时间定性,外标法定量。结果表明:16种有机氯农药在2.0~100μg/L质量浓度范围内的线性关系良好,相关系数均大于0.99,检出限为0.16~2.90μg/L,在4种基质(油菜、黄瓜、橙子、苹果)中的加标回收率为70.1%~119%,相对标准偏差(RSD)为0.23%~5.2%。与其它前处理方法相比,该方法简便、快速、准确、高效,可用于蔬菜及水果样品中有机氯残留的高通量快速筛查。     

高精度镉同位素分析样品消解方法对比研究

为考察不同消解方法的优缺点以及对不同基质样品(沉积物和大米)Cd同位素组成的影响,该文采用干法灰化法、酸提取法、微波消解法和高温高压密闭消解法等消解方法对水系沉积物(GSD)进行消解处理,比较了不同消解方法对沉积物Cd同位素组成测定的影响。随后使用微波消解法和高温高压密闭消解法对大米标准物质以及实际大米样品进行了消解。结果表明：高温高压密闭消解法所获得的沉积物Cd同位素测试结果在国内外文献报道的参考值范围内,能够满足同位素测定要求。而使用干法灰化法和酸提取法消解样品时,由于存在元素损失或消解不完全,标准物质Cd元素的回收率偏低(低至72.8%),导致同位素测试结果显著偏离真实值(Δ114/110Cd值最大偏差达0.24‰)。微波消解法处理标准物质Cd元素的回收率在96.6%~98.8%范围内,且同位素测试结果与高温高压密闭消解法结果吻合良好(Δ114/110Cd≤±0.04‰),表明微波消解法可以满足沉积物Cd同位素的测定要求,能够获得准确的Cd同位素组成数据。对大米标准物质和实际大米样品进行消解,所获得的Cd同位素测试结果与上述沉积物样品结果相同(Δ114/110Cd≤±0.04‰),进一步验证了微波消解法的可靠性,证实微波消解法可用于沉积物及植物样品(大米)Cd同位素分析的快速消解。     

Improved Initial Charging Capacity of Na-poor Na0.44MnO2 via Chemical Presodiation Strategy for Low-cost Sodium-ion Batteries

Sodium-ion batteries(SIBs)are promising for grid-scale energy storage applications due to the natural abundance and low cost of sodium.Among various Na insertion cathode materials,Na0.44MnO2 has attracted the most attention because of its cost effectiveness and structural stability.However,the low initial charge capacity for Na-poor Na0.44MnO2 hinders its practical applications.Herein,we developed a facile chemical presodiated method using sodiated biphenly to transform Na-poor Na0.44MnO2 into Na-rich Na0.66MnO2.After presodiation,the initial charge capacity of Na0.44MnO2 is greatly enhanced from 56.5 mA·h/g to 115.7 mA·h/g at 0.1 C(1 C=121 mA/g)and the excellent cycling stability(the capacity retention of 94.1%over 200 cycles at 2 C)is achieved.This presodiation strategy would open a new avenue for promoting the practical applications of Na-poor cathode materials in sodium-ion batteries.     

Donor-Acceptor Typed AIE Luminogens with Near-infrared Emission for Super-resolution Imaging

Aggregation-induced emission(AIE)luminogens(AIEgens)with high brightness in aggregates exhibit great potentials in biological imaging,but these AIEgens are seldom applied in super-resolution biological imaging,especially in the imaging by using the structural illumination microscope(SIM).Based on this consideration,we synthesized the donor-acceptor typed AIEgen of DTPA-BTN,which not only owns high brightness in the near-infrared(NIR)emission region from 600 nm to 1000 nm(photoluminescence quantum yield,PLQYs=11.35%),but also displays excellent photo-stability.In addition,AIE nanoparticles based on 4,7-ditriphenylamine-[1,2,5]-thiadiazolo[3,4-c]pyridine(DTPA-BTN)were also prepared with highly emissive features and excellent biocompatibility.Finally,the developed DTPA-BTN-based AIE nanoparticles were applied in the super-resolution cellular imaging via SIM,where much smaller full width at half-maximum values and high signal to noise ratios were obtained,indicating the superior imaging resolution.The results here imply that highly emissive AIEgens or AIE nanoparticles can be promising imaging agents for super-resolution imaging via SIM.     

Efficient Synthesis of p-Hydroxyphenyl Ethanol from Hydrogenation of Methyl p-Hydroxyphenylacetate with CNTs-promoted Cu-Zr Catalyst

Hydrogenation of methyl p-hydroxyphenylacetate has been used for the synthesis of p-hydroxyphenyl ethanol. The reaction was catalyzed by Cu_iZr_j-x%(mass fraction) carbon nanotubes(CNTs) catalysts. Incorporation of a minor amount of CNTs into Cu_iZr_j oxide can visibly increase the catalytic activity for the synthesis of p-hydroxyphenyl ethanol. The yield of p-hydroxyphenyl ethanol reaches 94.2% over a co-precipitated catalyst of Cu₃Zr₁ oxide with 11.0%CNTs. Its catalytic activity shows no obvious decrease after three cycles. This is much better than the CNT-free co-precipitated catalyst with a good yield of 81.1%, Cu₃Zr₁-0%CNTs.     

Ni(OH)2修饰的三聚氰胺泡沫用于可压缩超级电容器电极

通过化学镀和电化学镀的方法制备了一种Ni(OH)₂电化学活性材料修饰三聚氰胺泡沫(MF)可压缩骨架的超级电容器电极材料MF/Ni(OH)₂。MF/Ni(OH)₂可压缩电极材料表现出最佳的电容性能,例如循环稳定性(即使在40 mA/cm^-3的电流密度下经过2000次充放电循环后,可压缩电极仍能保持90.63%的初始电容)和可压缩稳定性(即使在压缩率为50%时,仍具有97.88%的电容保持率)。层状可压缩超级电容器由MF/Ni(OH)₂弹性材料作为阳极,镍/碳(Ni/C)为阴极以及实验室中常用的滤纸作隔膜材料组成。这种超级电容器装置在不同的压缩下表现出良好的电化学性能和优异的压缩稳定性。最后,使用可压缩的超级电容器来点亮LED灯,以展示其在柔性电子设备中的应用。这些优化的电化学和机械性能表明MF/Ni(OH)₂可作为可压缩超级电容器的应用中的候选电极。     

水相合成CdTe量子点测定海藻中微量碲

以亚碲酸钠(Na2TeO3)为Te源,CdCl2为Cd源,水合肼(SHJ)为还原剂,3-巯基丙酸(3-MPA)为稳定剂,制得λEX=380 nm和λEM=608 nm的CdTe量子点(CdTe QDs),该量子点的荧光强度与合成前Na2TeO3浓度呈线性关系.在n(Cd)/n(SHJ)=1∶0.04,n(Cd)/n(3-MPA)=1∶2.7,温度为100℃,反应时间为120m in,溶液pH 10.5的最佳条件下,可制备荧光量子产率为65％的CdTe QDs,该量子点的荧光强度与含碲物质的浓度符合较宽的线性范围(1.0～300 μmol/L),相关系数为0.9982,检测限为38 nmol/L.方法 用于测定微波消解下的海藻样品,加标回收率为106.0％ ～ 112.0％,RSD为5.4％ ～6.1％.